Page 15 - Demo

480N. Amani, A.A. Reza SoroushAUTHOR (S) BIOSKETCHESAmani, N., Ph.D., Assistant Professor, Department of Civil Engineering, Chalous Branch, Islamic Azad University, Chalous, Iran.Email: nimaamani@iauc.ac.irReza Soroush, A.A., M.Sc., (2020). Department of Civil Engineering, Chalous Branch, Islamic Azad University, Chalous, Iran.Email: amir.soroush57@gmail.comHOW TO CITE THIS ARTICLEAmani, N.; Reza Soroush, A.A., (2020). Effective energy consumption parameters in residential buildings using Building Information Modeling. Global J. Environ. Sci. Manage., 6(4): 467-480.DOI: 10.22034/gjesm.2020.04.04url: https://www.gjesm.net/article_39209.htmlCOPYRIGHTS%u00a92020 The author(s). This is an open access article distributed under the terms of the Creative Commons Attribution (CC BY 4.0), which permits unrestricted use, distribution, and reproduction in any medium, as long as the original authors and source are cited. No permission is required from the authors or the publishers.software. Autom. Constr., 57: 17%u201332 (16 pages). Choi, J.; Shin, J.; Kim, M.; Kim, I., (2016). Development of open BIMbased energy analysis software to improve the interoperability of energy performance assessment. Autom. Constr., 72: 52%u201364(13 pages). Eguaras-Mart%u00ednez, M.; Vidaurre-Arbizu, M.; Mart%u00edn-G%u00f3mez, C., (2014). Simulation and evaluation of building information modeling in a real pilot site. Appl. Energy, 114: 475%u2013484 (10 pages).Egwunatum, S.; Joseph-Akwara, E.; Akaigwe, R., (2017). Assessment of energy utilization and leakages in buildings with building information model energy. Frontier. Architect. Res., 6(1): 29%u201341(13 pages). Farzaneh, A.; Monfet, D.; Forgues, D., (2019). Review of using Building Information Modeling for building energy modeling during the design process. J. Build. Eng., 23: 127%u2013135 (9 pages).Gao, H.; Koch, C.; Wu, Y., (2019). Building information modelling based building energy modelling: A review. Appl. Energy, 238: 320%u2013343 (24 pages). Gerrish, T.; Ruikar, K.; Cook, M.; Johnson, M.; Phillip, M.; Lowry, C., (2017). BIM application to building energy performance visualisation and management Challenges and potential. Energy Build., 144: 218%u2013228 (11 pages).Guo, S.J.; Wei, T., (2016). Cost-effective energy saving measures based on BIM technology: Case study at National Taiwan University. Energy Build., 127: 433%u2013441 (9 pages).Habibi, S., (2017). The promise of BIM for improving building performance. Energy Build., 153: 525%u2013548 (24 pages).Jung, D.K.; Lee, D.H.; Shin, J.H.; Song, B.H.; Park, S.H., (2013). Optimization of energy consumption using BIM-based building energy performance analysis. Appl. Mech. Mater., 281: 649%u2013652 (4 pages).Kim, J.B.; Jeong, W.; Clayton, M.J.; Haberl, J.S.; Yan, W., (2015). Developing a physical BIM library for building thermal energy simulation. Autom. Constr., 50: 16%u201328 (13 pages).Kovacic, I.; Zoller, V., (2015). Building life cycle optimization tools for early design phases. Energy, 92: 409%u2013419 (11 pages).Kurian, C.P.; Milhoutra, S.; George, V.I., (2016). Sustainable building design based on building information modeling (BIM). 2016 IEEE International Conference on Power System Technology; POWERCON, 1%u20136 (6 pages). Li, Y.F.; Wang, H.C.; Zhao, M., Pan, W.Y., (2014). Analyses on the BIM Technology Using in the Design of Green Village Buildings. Appl. Mech. Mater., 548%u2013549: 1758%u20131762 (5 pages). Maltese, S.; Tagliabue, L.C.; Cecconi, F.R.; Pasini, D.; Manfren, M.; Ciribini, A.L.C., (2017). Sustainability Assessment through Green BIM for Environmental, Social and Economic Efficiency. Procedia Eng., 180: 520%u2013530 (11 pages). Ministry of Energy, (2016). Energy balance sheet, Office of Planning and Economics of Electricity and Energy. (In Persian).Motawa, I.; Carter, K., (2013). Sustainable BIM-based Evaluation of Buildings. Procedia Soc. Behav. Sci., 74: 419%u2013428 (10 pages).Najjar, M.; Figueiredo, K.; Hammad, A.W.A.; Haddad, A., (2019). Integrated optimization with building information modeling and life cycle assessment for generating energy efficient buildings. Appl. Energy, 250: 1366%u20131382 (17 pages). Nizam, R.S.; Zhang, C.; Tian, L., (2018). A BIM based tool for assessing embodied energy for buildings. Energy Build., 170: 1%u201314 (14 pages). Peng, C., (2016). Calculation of a building%u2019s life cycle carbon emissions based on Ecotect and building information modeling. J. Clean. Prod., 112: 453%u2013465 (13 pages).P%u00e9rez-Lombard, L.; Ortiz, J.; Pout, C., (2008). A review on buildings energy consumption information. Energy Build., 40(3): 394%u2013398(5 pages).Schlueter, A.; Thesseling, F., (2009). Building information model based energy/exergy performance assessment in early design stages. Autom. Constr., 18(2): 153%u2013163 (11 pages). Shivsharan, A. S.; Vaidya, R.; Shinde, R. D., (2017). 3D Modeling and energy analysis of a residential building using BIM tools. Int. Res. J. Eng. Tech., 4(7): 629-636 (8 pages). Singh, P.; Sadhu, A., (2019). Multicomponent Energy Assessment of Buildings using Building Information Modeling. Sustainable Cities Soc., 49: 1-12 (12 pages). Venkataraman, A.; Kannan, R., (2013). Whole Building Energy Analysis using BIM. Proceeding of International Conference on Advances in Civil Engineering; AETACE, 935-943 (9 pages).